Pipe and Water Distribution
and Return System to Complete Your Pad System

SEASONAL SPECIALS AND SUBSTANTIAL QUANTITY DISCOUNTS.

The system comes complete with a water distributor and cover, return gutter, strainer, pump and miscellaneous fittings and fasteners to complete the assembly.

The cells are supported at their base by the special support built into the gutter. The water distributor is composed of rigid PVC pipe with metered outlet holes. Flush-out plugs and connection tees are provided to facilitate clean out and water connection. All hardware and fittings are provided to ease the installation.

We now offer Kuul, Munters and Glacier Cor depending upon best shipping point, warehouse and size to meet all needs worldwide.

The return gutter supports the cells that when wet weigh 2 3/4 Ibs. 4" (4 Ibs. - 6") per square foot and, therefore, should be adequately reinforced and supported.

4" AND 6" ALUMINUM SYSTEM

The aluminum system utilizes quick snap together components for easy installation using a minimum of hardware. The heavy extruded gutter and support are designed to support the pads and carry the water back to a sump with capacities for an 8' x 100' system in 4" pad and an 8' x 80' system in 6" pad. The aluminum top cover is made in two pieces to facilitate cleaning the PVC pipe if clogged.

OPTIONAL EQUIPMENT

Acme's 8" PVC transition pump tank is ideal for installation in rocky areas. The Acme high efficiency system is made up of a covered polyethylene transition pump tank, coupling and end cap for 8" PVC pipe (supplied by others ) and a float valve and bracket assembly.

4" AND 6" SYSTEMS

Available in aluminum, galvanized and stainless steel
4 " systems available in all aluminum
Custom Sizing - sections available in one foot increments (5' - 50') to maximize efficiency and prevent additional installation requirements.
Fully prefabricated
Pre assembled gutter sections reduce installation costs.
Tall pad supports - provide additional support for 4" systems with pads over 48" tall.

These pumps are heavy duty centrifugal, self priming type featuring high volume and low head pressure performance.

These pumps are submersible type with cast iron housing, polypropylene base and Polycarbonate cover. They include a lifetime oil supply and non-clog pumping head and impeller

Model	Type	HP	Voltage/ Phase	Capacity At 10' Head	Total Systems Length
Model	Type	HP	Voltage/ Phase	Capacity At 10' Head	4"	6"
#30	Centrifugal	1/3	1151230/1	42 GPM	70'	55'
#60	Centrifugal	112	115/230/1	55 GPM	100'	80'
#15S	Submersible	1/4	115/1	29 GPM	40'	35'
#30S	Submersible	113	115/1	42 GPM	70'	55'
#60S	Submersible	112	115/1	63 GPM	100'	80'

The plumbing package is designed for use with all the pumps for the KoolCel systems and includes the necessary plumbing fittings and valve to complete the installation from the sump to the distributor and also contains the water strainer and float valve.

The sump tank cover and tank fittings are furnished by others and should be sized to provide 3/4 gallon per square foot of 4" pad area and 1 gallon per square foot of 6" pad area.

4" KoolCel system complete. 468' (142m) long house in China.

New installation - Texas - USA.

Available From A Location Near.

We have sold Kool-Cel and Celdek Worldwide for over 30 years. With proper maintenance your pads should operate efficient for many years. Even in the Mideast with their high salts - proper operation will give years of service. We also offer cooling pads from...

Kuul & Glacier Cor Munters & Acme

Custom sizes available
Edge coatings available
Worldwide warehouses
Available in 2" (5cm), 4" (10cm) and 6" (15cm) thickness
Fluted angles
Treated pads
12" (30cm) and 24" (60cm) wide
Standard Heights 24" (61 cm), 36" (91cm), 48" (122cm), 60" (152cm, 72" (183 cm), 78" (198cm).

Click Here to see Cooling Pads Section

Pipe and Water Distribution and Return System to Complete Your Pad System

Available From A Location Near.

Kuul & Glacier Cor Munters & Acme

Pipe and Water Distribution
and Return System to Complete Your Pad System